STM32F030C8T6 SMD LQFP48 32-Bit Microprocessor Microcontroller Integrated Chip IC ST IC Chip

STM32F0x0 Value Series

The STM32F030 uses an ARM Cortex core with an operating speed of up to 48 MHz. The STM32F030 is the lowest priced product in the STM32 series and features a full set of peripherals such as high-speed 12-bit ADC, advanced and flexible timers, calendar RTC and communication interfaces such as I²C, USART and SPI.

This combination easily surpasses existing 8-bit architectures, allowing all application designers to benefit from the simplicity and efficiency of an advanced 32-bit core. The STM32F030 Value Line offers a variety of memory capacity and pin count combinations that are matched by few devices, further optimizing project costs.

Application designers using the STM32F030 can upgrade to any product in the powerful STM32 family at any time, and the reusability of tools and application software is extremely high.

STM32F030x4 STM32F030x6 STM32F030x8 STM32F030xC series

Value-line ARM?-based 32-bit MCU with up to 256-KB Flash, timers, ADC, communication interfaces, 2.4-3.6 V operation

Features

• Core: ARM? 32-bit Cortex?-M0 CPU, frequency up to 48 MHz
• Memories
  • 16 to 256 Kbytes of Flash memory
  • 4 to 32 Kbytes of SRAM with HW parity
• CRC calculation unit
• Reset and power management
  • Digital & I/Os supply: VDD = 2.4 V to 3.6 V
  • Analog supply: VDDA = VDD to 3.6 V
  • Power-on/Power down reset (POR/PDR)
  • Low power modes: Sleep, Stop, Standby
• Clock management
  • 4 to 32 MHz crystal oscillator
  • 32 kHz oscillator for RTC with calibration
  • Internal 8 MHz RC with x6 PLL option
  • Internal 40 kHz RC oscillator
• Up to 55 fast I/Os
  • All mappable on external interrupt vectors
  • Up to 55 I/Os with 5V tolerant capability
• 5-channel DMA controller
• One 12-bit, 1.0 μs ADC (up to 16 channels)
  • Conversion range: 0 to 3.6 V
  • Separate analog supply: 2.4 V to 3.6 V
• Calendar RTC with alarm and periodic wakeup from Stop/Standby
• 11 timers
  • One 16-bit advanced-control timer for six-channel PWM output
  • Up to seven 16-bit timers, with up to four IC/OC, OCN, usable for IR control decoding
  • Independent and system watchdog timers
  • SysTick timer
• Communication interfaces
  • Up to two I2C interfaces
  • one supporting Fast Mode Plus (1 Mbit/s) with 20 mA current sink,
  • one supporting SMBus/PMBus.
  • Up to six USARTs supporting master synchronous SPI and modem control; one with auto baud rate detection
  • Up to two SPIs (18 Mbit/s) with 4 to 16 programmable bit frames
• Serial wire debug (SWD)